BEVINSEE udskiftningsbeholder til sprinklervæske til Toyota 4Runner 2014-2024
Ikke på lager
9132014001
Normalpris
€196,99
Udsalgspris
€196,99
Normalpris
Enhedspris
pr.
Forsendelse beregnes ved betaling.
🍬Big Treats for Your Ride.
Kunne ikke indlæse oplysninger om afhentning tilgængelig.
- Helt sikker betaling
- Betroet af tusindvis af kunder
- Vurderet og anmeldt
Vil du have afsendelse næste dag? Skynd dig!
Udsolgt
Den fabriksmonterede sprinklervæskebeholder sidder lavt og bliver let slået løs under terrænkørsel;
Hvis den forreste kofanger ændres, vil den fabriksmonterede beholder blive eksponeret og være mere udsat for skader.
Derfor har BEVINSEE designet beholderen til at blive flyttet til en højere position inde i den forreste kofanger for at mindske risikoen for skader ved terrænkørsel.
Funktioner:
-
【Robust og holdbar】Aluminium fremstillet af et massivt emne sikrer produktets styrke og længere levetid end den fabriksmonterede plastbeholder.
-
【Anodiseret overflade】Tekstur i høj kvalitet, rustbestandig og korrosionsbestandig.
- 【Passer til fabriksmonterede dele】Bevarer monteringsstederne til den fabriksmonterede vandpumpe og niveausensor og kan monteres direkte med det fabriksmonterede vandpumpesæt, uden behov for eftermarkedspumper og ledningsføring.
Produktspecifikationer:
- Mærke: BEVINSEE
- Stand: Helt ny
- Type: Udskiftning af sprinklervæskebeholder
- Erstatter reservedelsnummer: 52103-35110
- Monteringsposition: Inde i den forreste kofanger
- Materiale: Udfræset aluminium
- Fremstilling: Svejsning
- Indeholder 2 liter sprinklervæske
- Kapacitet: Indeholder 2 liter sprinklervæske
Pakken indeholder:
1X udskiftning af sprinklervæskebeholder
1X dæksel til sprinklervæskebeholder
2X skruer
2X skiver
1X kobberskive i komposit
Passer til:
Til Toyota 4Runner 2014-2024
Ansvarsfraskrivelse:
Reservedele fra Bevinsee Store er ikke sponsoreret, godkendt af eller tilknyttet de mærker, som delene passer til, herunder Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline osv.
E
Great quality, easy install and makes room for my oversized tires. Wheel well photo is just to show relocated bottle and now plenty of room for oversize tires.
T
I've installed multiple Bevinsee components on my fifth-gen 4Runner over the past few months, and if you'e ever ordered from them, you know their build quality and packaging are always top-notch. This radiator upgrade perfectly solved my aftermarket bumper clearance issue, since the stock unit was exposed �� definitely a worthwhile investment.
C
Got it fast, easy install, and it relocated perfectly away from the tires. My OEM tank cracked when my wide wheels rubbed against it. Even the metal guard tore off and dumped all the washer fluid. I drove for months without a reservoir �� not fun. Then I found this upgrade on google and grabbed it instantly. Super glad I did, since I already run several Bevinsee parts on my 4Runner �� everything from them performs flawlessly!
T
The product keeps the factory pump and sensor mounting locations while replacing the reservoir with a corrosion-resistant billet aluminum design. A 2-liter capacity and supplied cap make the package easy to assess.
C
For a 4Runner setup where the factory washer bottle may be exposed after bumper changes, this product offers a higher inside-the-bumper mounting position. The fitment check remains important.
B
The welded billet aluminum reservoir has an anodized surface and comes with a cap, screws, washers, and a copper composite washer. It is a well-specified replacement for the stated 4Runner years.
A
A useful detail is the provision for the factory water pump and level sensor mounting locations, so the product is designed around the original pump kit and wiring. The listed capacity is 2 liters.
M
The relocation concept is aimed at giving the reservoir more protection during off-road use.
W
Nothing complicated here,which is exactly what I wanted.It fit properly and saved me from trying to repair the old reservoir.
R
No cutting and no fighting the mounting position.The reservoir went in cleanly and the finished installation looks tidy.
E
The replacement looks fresh compared with the old tank.I mainly wanted to get rid of the worn factory piece and this made the job simple.
G
This was easier than I expected.I reused the original location and had no trouble getting the reservoir seated correctly.
T
The original reservoir was looking rough so I went with this replacement.The fit was good and everything went together without any strange hose routing.
J
An ideal solution without the $120 price tag. Shift the OEM fuel tank to gain additional wheel clearance. Disassembly can take some time, but mounting is quick and straightforward.
Z
Excellent solution to gain extra space. No more interference with my windshield washer reservoir. Quick and easy 30-minute install in my garage last weekend.
K
I watched a few tutorials, and removing the OEM components was the toughest part of the install. The new parts went in effortlessly, with flawless welds! Definitely worth it. I also cleaned the hubcaps, which added clearance and made the setup look much cleaner. Highly recommended, took about an hour to finish. On my 2023 4Runner, it was very easy. You might need a helper. Overall, a very engaging installation experience.
