BEVINSEE Zbiornik płynu chłodniczego do Toyoty 4Runner 2010-2024
Dostępne na stanie
9112006601
Cena regularna
€92,99
Cena promocyjna
€92,99
Cena regularna
Cena jednostkowa
na
Koszt wysyłki zostanie obliczony przy kasie.
💥 Labor Day Savings Start Now
Nie udało się wczytać dostępności odbioru osobistego
- W pełni bezpieczna płatność
- Zaufały nam tysiące klientów
- Ocenione i zrecenzowane
Chcesz, aby wysyłka nastąpiła następnego dnia? Pospiesz się!
Cechy:
-
【Materiał ulepszony do stopu aluminium】Solidniejszy i trwalszy, mniej podatny na starzenie i odkształcenia oraz lepiej odprowadza ciepło.
-
【Uwaga】Po wyłączeniu samochodu zbiornik będzie miał taką samą temperaturę jak płyn. Nie dotykaj go, aby uniknąć oparzenia.
-
【Przezroczysty otwór do obserwacji poziomu płynu】Poziom płynu jest zawsze wyraźnie widoczny i nie jest zasłaniany przez nieczytelną podziałkę.
- 【Łatwy montaż】Nie ma potrzeby wycinania otworów ani zmiany położenia zbiornika — należy użyć oryginalnych otworów montażowych oraz dopasować oryginalne śruby i złączki przewodów.
Specyfikacja produktu:
- Marka: BEVINSEE
- Stan: fabrycznie nowy
- Typ: zbiornik płynu chłodniczego
- Zastępuje numer części: 16470-31050
- Miejsce montażu: po lewej stronie komory silnika, na obudowie wentylatora chłodnicy
- Materiał: aluminium 6061 obrabiane CNC
- Wykończenie powierzchni: anodowane
Zawartość opakowania:
1X Zbiornik płynu chłodniczego
Pasuje do:
Do Toyoty 4Runner 2010–2024
Zastrzeżenie:
Części Bevinsee nie są sponsorowane ani zatwierdzone przez marki, do których pojazdów pasują, ani z nimi powiązane, w tym Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline itd.
E
Looks great, literally a 5 minute install.
m
Great product! Perfect fit on the 4th gen V6 4Runner
T
Simple replacement with a nicer finish than stock.The level is easy to check and everything sits where it should.
W
My 2012 4Runner needed a fresh coolant reservoir and I decided to go aluminum instead of replacing it with another plastic tank.It fits well, looks sharp and uses the original mounting position.Exactly what I wanted.
T
I was surprised by how substantial the reservoir felt out of the box.Installed it on my 2023 4Runner and everything lined up as expected.The level window makes quick checks easy and the aluminum construction feels like a proper long term upgrade.
R
Really impressed when I opened the box.The reservoir feels solid and the hose connections lined up like they should.Installation was easier than expected.
C
This went right into my 2014 4Runner using the original location and hardware.No cutting, no strange hose routing and the finished install looks excellent.
C
The fit was right on and the finish looks good.I mainly wanted something more durable than the old plastic tank and this does the job.
M
This feels much more substantial than the factory reservoir.Everything lined up in the original location and I was done without fighting the mounting points.
M
My original reservoir was looking old, so I replaced it on my 2016 4Runner.The factory mounting points and hose connections lined up correctly.Installation was straightforward and the anodized aluminum looks fantastic in the engine bay.The clear level window is a really useful detail too.
J
I replaced the tired plastic tank with this aluminum one and the install was straightforward.The level window is a nice touch and the engine bay looks much cleaner.
E
Good fit, clean machining and an easy coolant level check.What else do you need?The engine bay looks noticeably better now.
L
Wasn't sure how much I'd care about an aluminum coolant reservoir until I installed it.It looks much cleaner and feels like a long term solution.The install was quick and the factory hose connections fit without any fuss.
B
I like upgrades that actually improve function instead of just adding looks.This one does both.The 6061 aluminum body feels substantial, the coolant level is easy to see and everything lined up with the original mounting points.Really happy with it.
G
Installed on my 2019 4Runner.The aluminum reservoir fit perfectly and the water level window is much easier to read than the old plastic tank.Very clean setup.
M
Very straightforward swap.No cutting or relocating anything.The reservoir sits where it should and the sight window is much easier to read than a cloudy plastic tank.
O
The original plastic tank was starting to look tired, so I wanted something more durable.This uses the factory mounting location and hose fittings, which kept the install simple.The anodized finish really cleans up the engine bay too.
E
Installed this in place of the factory reservoir and the fit was right on.The aluminum construction feels solid and the clear level window makes a quick coolant check much easier.Nice upgrade!
C
At first, I had second thoughts, but after I put it on and how good it looks and how easy it is super clean great structure would totally do it over again. I’ve recommended it to a few of my friends. They have bought it and we’re also happy five stars all the way.
K
Coolant Reservoir For Toyota 4Runner 2010-2024
