Przejdź do informacji o produkcie
1 z 8

Zaślepka rurki bagnetu oleju LS do miski silnikowej Chevrolet Trailblazer Gen 3/4

Dostępne na stanie

9111171101

Cena regularna €15,99
Cena promocyjna €15,99 Cena regularna €17,99
Koszt wysyłki zostanie obliczony przy kasie.
  • W pełni bezpieczna płatność
  • Zaufały nam tysiące klientów
  • Ocenione i zrecenzowane

Chcesz, aby wysyłka nastąpiła następnego dnia? Pospiesz się!

Do 11% taniej
Cechy:
  • Kompatybilne ze wszystkimi silnikami LS i LT, do montażu w misce olejowej i bloku silnika lub w samym bloku silnika.
  • Przeznaczone do silników LS lub misek olejowych z miską przednią, w których w bloku silnika znajduje się dodatkowy otwór na bagnet oleju.
  • Wykonane metodą obróbki CNC z aluminium lotniczego 6061-T6. 
  • Wysokiej jakości anodowane wykończenie chroniące przed rdzą i korozją

Specyfikacja:
  • Marka: Bevinsee
  • Typ: zaślepka rurki bagnetu oleju LS
  • Materiał: aluminium 6061-T6
  • Wykończenie powierzchni: anodowane 
  • Kolor: czarny
  • Miejsce montażu w pojeździe: miska olejowa i/lub blok silnika
  • Średnica końcówki: 9,9 mm / 0,39 cala
Uwaga:
Średnica końcówki wynosi 9,9 mm.
Wbij tę zaślepkę młotkiem, aby osadzić ją w pustym otworze. Przed montażem zastosuj odpowiedni środek smarny na o-ringach.
 

Zawartość opakowania:
1 zaślepka z 2 o-ringami


Kompatybilność:
Do silników LS Vortec (wyłącznie silnik Vortec)

Do Chevrolet Corvette 1997–2013
Do Chevrolet Silverado 1500 1999–2013
Do Chevrolet Silverado 1500 HD 2001–2007
Do Chevrolet Silverado 2500 1999–2013
Do Chevrolet Silverado 2500 HD 2001–2013
Do Chevrolet Trailblazer 2006–2009
Do GMC Sierra 2007–2013
Do GMC Sierra 1500 1999–2013
Do GMC Sierra 1500 HD 2001–2007
Do GMC Sierra 2500 1999–2004
Do GMC Sierra 2500 HD 2001–2013



Zastrzeżenie: Części sklepu Bevinsee nie są sponsorowane ani zatwierdzane przez marki, do których pasują, ani z nimi powiązane, w tym Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline itd.



  • 5 stars: 11 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Andre Cox
BMW emblems

Works perfectly

z
zequiel
Great plug and tight as it��s meant to be.

Does it��s job. It will be tight as it is supposed to be, you don��t want a plug falling from the block or leaking when enough pressure is built. So it is amazing that it fits very tight. Love it!

m
mantti
Press it

Did have to use a bit of force to press it in.

B
Burreent
Good product.

Works great, maybe you need to tap it in with a hammer but thats to be expected.

T
Thomas Honken
Quality Piece

Eitherway great part from a great company.

M
Megechor
Worked great with modification

Had to bevel the end to get it to start into the hole. Nice tight fit.

F
Frankie
Fits snug with light taps

I lubed up to O-rings with oil and cleaned the rusty hole with a rag and oil. Since I had the engine in the car I used a 1/2" extension and lightly hammered it in and only took me a few minutes before it was almost bottomed out and no damage was done to the plug.

M
Marko
Yes.

It fit in my GMC Sierra 2007

K
Kenge
I think it works

I bought this hoping that it was close enough. Well I found that if I put 2 O rings on it that matched the ones that came with it then the plug had a nice tight fit - walla - I now had the dipstick hole plugged!

l
lamian
Worked on my chevy

Worked on my Chevrolet Silverado 1500 1999

P
Paco
Tight fit

Tight fit needed some persuasion but that��s what you want. Used a small socket on an extension with a rubber mallet and it went in nice and tight fit.

Masz pytania dotyczące tego produktu? Kliknij, aby skontaktować się z nami i uzyskać więcej informacji.