Prop til oliepindrør til LS Gen 3/4 Chevrolet Trailblazer-oliekar

På lager

9111171101

€15,99
€15,99 €17,99
Forsendelse beregnes ved betaling.

🍬Big Treats for Your Ride.

Enjoy 13% OFF 2+ parts, Code: HA13 🛒. copy

Enjoy 18% OFF 3+ parts, Code: HA18 🛒. copy

  • Helt sikker betaling
  • Betroet af tusindvis af kunder
  • Vurderet og anmeldt

Vil du have afsendelse næste dag? Skynd dig!

Op til 11 % rabat
Funktioner:
  • Egnet til alle LS- og LT-motorer, i oliebundkarret og motorblokken eller motorblokken.
  • Anvendes på LS-motorer eller oliebundkar med oliebundkar med frontsumpe, hvilket resulterer i et ekstra hul til oliepejlet i motorblokken.
  • CNC-bearbejdet af 6061-T6-aluminium i flykvalitet. 
  • Anodiseret overfladebehandling af høj kvalitet, der beskytter mod rust og korrosion

Specifikationer:
  • Mærke: Bevinsee
  • Type: LS-oliepejlstusrørprop
  • Materiale: 6061-T6-aluminium
  • Overfladebehandling: Anodiseret 
  • Farve: Sort
  • Placering på køretøjet: Oliebundkar og/eller motorblok
  • Endens diameter: 9,9 mm / 0,39 tommer
Bemærk:
Endens diameter er 9,9 mm.
Sørg for at banke denne prop på plads med en hammer, så den sidder korrekt i det tomme hul. Brug passende smøremiddel på O-ringene før montering.
 

Pakken indeholder:
1 prop med 2 O-ringe


Passer til:
Til LS Vortec-motorer (kun Vortec-motor)

Til Chevrolet Corvette 1997-2013
Til Chevrolet Silverado 1500 1999-2013
Til Chevrolet Silverado 1500 HD 2001-2007
Til Chevrolet Silverado 2500 1999-2013
Til Chevrolet Silverado 2500 HD 2001-2013
Til Chevrolet Trailblazer 2006-2009
Til GMC Sierra 2007-2013
Til GMC Sierra 1500 1999-2013
Til GMC Sierra 1500 HD 2001-2007
Til GMC Sierra 2500 1999-2004
Til GMC Sierra 2500 HD 2001-2013



Ansvarsfraskrivelse: Reservedele fra Bevinsee Store er hverken sponsoreret, godkendt af eller tilknyttet de mærker, som reservedelene passer til, herunder Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline osv.
  • 5 stars: 11 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Andre Cox
BMW emblems

Works perfectly

z
zequiel
Great plug and tight as it��s meant to be.

Does it��s job. It will be tight as it is supposed to be, you don��t want a plug falling from the block or leaking when enough pressure is built. So it is amazing that it fits very tight. Love it!

m
mantti
Press it

Did have to use a bit of force to press it in.

B
Burreent
Good product.

Works great, maybe you need to tap it in with a hammer but thats to be expected.

T
Thomas Honken
Quality Piece

Eitherway great part from a great company.

M
Megechor
Worked great with modification

Had to bevel the end to get it to start into the hole. Nice tight fit.

F
Frankie
Fits snug with light taps

I lubed up to O-rings with oil and cleaned the rusty hole with a rag and oil. Since I had the engine in the car I used a 1/2" extension and lightly hammered it in and only took me a few minutes before it was almost bottomed out and no damage was done to the plug.

M
Marko
Yes.

It fit in my GMC Sierra 2007

K
Kenge
I think it works

I bought this hoping that it was close enough. Well I found that if I put 2 O rings on it that matched the ones that came with it then the plug had a nice tight fit - walla - I now had the dipstick hole plugged!

l
lamian
Worked on my chevy

Worked on my Chevrolet Silverado 1500 1999

P
Paco
Tight fit

Tight fit needed some persuasion but that��s what you want. Used a small socket on an extension with a rubber mallet and it went in nice and tight fit.

Spørgsmål til dette produkt?
Klik for at kontakte os og få flere oplysninger.

Kontakt os