BEVINSEE-jäähdytysnestesäiliö Toyota 4Runnerille 2010–2024
Loppu varastosta
9112006601
Normaali hinta
€92,99
Alennushinta
€92,99
Normaali hinta
Kappalehinta
kohti
Toimituskulut lasketaan kassalla.
🍬Big Treats for Your Ride.
Noutomahdollisuuden lataaminen epäonnistui
- Täysin turvallinen kassatoiminto
- Tuhannet luottavat meihin
- Arvioitu ja arvosteltu
Haluatko, että tilauksesi lähetetään seuraavana päivänä? Toimi nopeasti!
Loppuunmyyty
Ominaisuudet:
-
【Materiaali päivitetty alumiiniseokseksi】Vankempi ja kestävämpi, ei vanhene tai väänny helposti ja johtaa lämpöä tehokkaammin pois.
-
【Huomautus】Säiliö on juuri sammutetun auton jälkeen yhtä kuuma kuin neste. Älä kosketa sitä palovammojen välttämiseksi.
-
【Läpinäkyvä vedenpinnan tarkistusaukko】Vedenpinta näkyy jatkuvasti selkeästi, eikä epätarkka asteikko vaikuta näkyvyyteen.
- 【Helppo asennus】Reikiä ei tarvitse porata eikä säiliön paikkaa muuttaa. Käytä alkuperäisiä kiinnitysreikiä sekä alkuperäisiä ruuveja ja letkuliitäntöjä.
Tuotetiedot:
- Merkki: BEVINSEE
- Kunto: uusi
- Tyyppi: jäähdytysnestesäiliö
- Korvaa osanumeron: 16470-31050
- Asennuspaikka: moottoritilan vasemmalla puolella jäähdyttimen tuulettimen kotelossa
- Materiaali: 6061-koneistettu alumiini
- Pintakäsittely: anodisoitu
Pakkaus sisältää:
1X jäähdytysnestesäiliö
Sopivuus:
Toyota 4Runner 2010–2024
Vastuuvapauslauseke:
Bevinseen osat eivät ole Porsche-, Subaru-, Jaguar-, BMW-, Isuzu-, Chrysler-, Dodge-, Jeep-, Buick-, Cadillac-, Chevrolet-, GMC-, Volvo-, Land Rover-, Oldsmobile-, Pontiac-, Ford-, Lincoln-, Mercury-, Acura-, KIA-, Nissan-, Infiniti-, International Harvester-, Mitsubishi-, Audi-, Lexus-, Toyota-, Mazda-, Volkswagen-, Suzuki-, Saab-, Honda-, Alfa Romeo-, Saleen-, Mercedes-Benz-, Nash-, Hummer-, Freightliner-, Datsun-, Saturn-, Turner-, Geo-, Lada-, Fiat-, Daihatsu-, Opel-, Vauxhall-, Sabra-, Tesla-, Ram-, Rover-, Skoda-, Healey-, Mini-, Smart-, Scion-, Renault-, Seat-, Peugeot-, Merkur-, Astra-, Tucker-, VW-, Routan-, Tiguan-, Touareg-, Jetta-, Gti-, Passat-, Golf-, Bosch-, Denso-, Holden-, Chery-, Mercedes Benz-, Holden Special Vehicles-, Hyundai-, Trabant-, Citroën- tai Freightline-merkkien sponsoroimia, hyväksymiä tai niihin sidoksissa, vaikka osat sopivat kyseisten merkkien ajoneuvoihin, eivätkä myöskään muiden tässä mainitsemattomien merkkien sponsoroimia, hyväksymiä tai niihin sidoksissa.
S
Why have a discolored plastic jug for ypur coolant when you can have a masterpiece that works and fits well with your 4Runner.
The level window is every easy to see your coolant level and the aluminum body is sexy.
B
I have 1 2003 4th Gen 4runner 4.7l and I recently installed the coolant resvoir tank and it fitted perfectly...but you guys didn't have it as an option for.my vehicle.....the power steering resvoir also fitted with some.sl8ght modification....but they both look lovely
E
Looks great, literally a 5 minute install.
m
Great product! Perfect fit on the 4th gen V6 4Runner
N
Very Nice upgrade Compared to the stock plastic one.
N
The transparent observation area is the standout feature here because it stays readable instead of relying on a fuzzy molded scale. It is a focused upgrade for Toyota 4Runner 2010-2024 applications.
T
A straightforward replacement-style reservoir with 6061 billet aluminum construction and an anodized surface. The page clearly identifies the left-side engine-compartment mounting position for the listed 4Runner fitment.
E
The upgraded aluminum material, clear water-level observation hole, and original-position mounting make this a sensible coolant reservoir concept. The black and red finish options add a little choice without changing the function.
J
This product is specifically listed for 4Runner 2010-2024 and uses the original mounting holes, screws, and hose fittings. That keeps the design focused and easy to understand.
M
The 6061 billet aluminum construction and anodized finish make this coolant reservoir feel like a considered replacement for the factory plastic tank. The permanently clear level window is especially useful.
T
Simple replacement with a nicer finish than stock.The level is easy to check and everything sits where it should.
W
My 2012 4Runner needed a fresh coolant reservoir and I decided to go aluminum instead of replacing it with another plastic tank.It fits well, looks sharp and uses the original mounting position.Exactly what I wanted.
T
I was surprised by how substantial the reservoir felt out of the box.Installed it on my 2023 4Runner and everything lined up as expected.The level window makes quick checks easy and the aluminum construction feels like a proper long term upgrade.
R
Really impressed when I opened the box.The reservoir feels solid and the hose connections lined up like they should.Installation was easier than expected.
C
This went right into my 2014 4Runner using the original location and hardware.No cutting, no strange hose routing and the finished install looks excellent.
C
The fit was right on and the finish looks good.I mainly wanted something more durable than the old plastic tank and this does the job.
M
This feels much more substantial than the factory reservoir.Everything lined up in the original location and I was done without fighting the mounting points.
M
My original reservoir was looking old, so I replaced it on my 2016 4Runner.The factory mounting points and hose connections lined up correctly.Installation was straightforward and the anodized aluminum looks fantastic in the engine bay.The clear level window is a really useful detail too.
J
I replaced the tired plastic tank with this aluminum one and the install was straightforward.The level window is a nice touch and the engine bay looks much cleaner.
E
Good fit, clean machining and an easy coolant level check.What else do you need?The engine bay looks noticeably better now.
L
Wasn't sure how much I'd care about an aluminum coolant reservoir until I installed it.It looks much cleaner and feels like a long term solution.The install was quick and the factory hose connections fit without any fuss.
B
I like upgrades that actually improve function instead of just adding looks.This one does both.The 6061 aluminum body feels substantial, the coolant level is easy to see and everything lined up with the original mounting points.Really happy with it.
G
Installed on my 2019 4Runner.The aluminum reservoir fit perfectly and the water level window is much easier to read than the old plastic tank.Very clean setup.
M
Very straightforward swap.No cutting or relocating anything.The reservoir sits where it should and the sight window is much easier to read than a cloudy plastic tank.
O
The original plastic tank was starting to look tired, so I wanted something more durable.This uses the factory mounting location and hose fittings, which kept the install simple.The anodized finish really cleans up the engine bay too.
E
Installed this in place of the factory reservoir and the fit was right on.The aluminum construction feels solid and the clear level window makes a quick coolant check much easier.Nice upgrade!
C
At first, I had second thoughts, but after I put it on and how good it looks and how easy it is super clean great structure would totally do it over again. I’ve recommended it to a few of my friends. They have bought it and we’re also happy five stars all the way.
K
Coolant Reservoir For Toyota 4Runner 2010-2024
