BEVINSEE-pesunestesäiliön vaihtokappale Toyota 4Runnerille 2014–2024
Loppu varastosta
9132014001
Normaali hinta
€196,99
Alennushinta
€196,99
Normaali hinta
Kappalehinta
kohti
Toimituskulut lasketaan kassalla.
🍬Big Treats for Your Ride.
Noutomahdollisuuden lataaminen epäonnistui
- Täysin turvallinen kassatoiminto
- Tuhannet luottavat meihin
- Arvioitu ja arvosteltu
Haluatko, että tilauksesi lähetetään seuraavana päivänä? Toimi nopeasti!
Loppuunmyyty
Tehdasasenteinen pesunestesäiliö sijaitsee matalalla ja irtoaa helposti maastoajossa;
Jos etupuskuria muokataan, tehdasasenteinen säiliö jää näkyviin ja vaurioituu helpommin.
Tästä syystä BEVINSEE suunnitteli säiliön siirrettäväksi etupuskurin sisäpuolella korkeammalle, jotta vaurioitumisen riski maastoajossa olisi pienempi.
Ominaisuudet:
-
【Vankka ja kestävä】Koneistetusta alumiinista valmistettu rakenne takaa tuotteen lujuuden ja pidemmän käyttöiän kuin tehdasasenteisella muovisäiliöllä.
-
【Anodisoitu pinta】Laadukas viimeistely, ruosteen- ja korroosionkestävä.
- 【Tehdasosien yhteensopivuus】Säilyttää tehdasasenteisen vesipumpun ja vedenpinnan anturin kiinnityspaikat. Voidaan asentaa suoraan tehdasasenteisella vesipumppusarjalla ilman tarvikevesipumppuja tai johdotuksia.
Tuotetiedot:
- Tuotemerkki: BEVINSEE
- Kunto: Uusi
- Tyyppi: Lasinpesunestesäiliön vaihtosäiliö
- Korvaa osanumeron: 52103-35110
- Asennuspaikka: Etupuskurin sisäpuolella
- Materiaali: Koneistettu alumiini
- Valmistusmenetelmä: Hitsaus
- Säiliöön mahtuu 2 litraa lasinpesunestettä
- Tilavuus: Säiliöön mahtuu 2 litraa lasinpesunestettä
Pakkauksen sisältö:
1X lasinpesunestesäiliön vaihtosäiliö
1X lasinpesunestesäiliön korkki
2X ruuvi
2X aluslevy
1X kuparikomposiittialuslevy
Sopivuus:
Toyota 4Runner 2014–2024
Vastuuvapauslauseke:
Bevinsee Storen osat eivät ole sponsoroituja tai tukemia, eivätkä ne ole sidoksissa tuotemerkkeihin, joiden ajoneuvoihin osat sopivat, mukaan lukien Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline jne.
E
Great quality, easy install and makes room for my oversized tires. Wheel well photo is just to show relocated bottle and now plenty of room for oversize tires.
T
I've installed multiple Bevinsee components on my fifth-gen 4Runner over the past few months, and if you'e ever ordered from them, you know their build quality and packaging are always top-notch. This radiator upgrade perfectly solved my aftermarket bumper clearance issue, since the stock unit was exposed �� definitely a worthwhile investment.
C
Got it fast, easy install, and it relocated perfectly away from the tires. My OEM tank cracked when my wide wheels rubbed against it. Even the metal guard tore off and dumped all the washer fluid. I drove for months without a reservoir �� not fun. Then I found this upgrade on google and grabbed it instantly. Super glad I did, since I already run several Bevinsee parts on my 4Runner �� everything from them performs flawlessly!
T
The product keeps the factory pump and sensor mounting locations while replacing the reservoir with a corrosion-resistant billet aluminum design. A 2-liter capacity and supplied cap make the package easy to assess.
C
For a 4Runner setup where the factory washer bottle may be exposed after bumper changes, this product offers a higher inside-the-bumper mounting position. The fitment check remains important.
B
The welded billet aluminum reservoir has an anodized surface and comes with a cap, screws, washers, and a copper composite washer. It is a well-specified replacement for the stated 4Runner years.
A
A useful detail is the provision for the factory water pump and level sensor mounting locations, so the product is designed around the original pump kit and wiring. The listed capacity is 2 liters.
M
The relocation concept is aimed at giving the reservoir more protection during off-road use.
W
Nothing complicated here,which is exactly what I wanted.It fit properly and saved me from trying to repair the old reservoir.
R
No cutting and no fighting the mounting position.The reservoir went in cleanly and the finished installation looks tidy.
E
The replacement looks fresh compared with the old tank.I mainly wanted to get rid of the worn factory piece and this made the job simple.
G
This was easier than I expected.I reused the original location and had no trouble getting the reservoir seated correctly.
T
The original reservoir was looking rough so I went with this replacement.The fit was good and everything went together without any strange hose routing.
J
An ideal solution without the $120 price tag. Shift the OEM fuel tank to gain additional wheel clearance. Disassembly can take some time, but mounting is quick and straightforward.
Z
Excellent solution to gain extra space. No more interference with my windshield washer reservoir. Quick and easy 30-minute install in my garage last weekend.
K
I watched a few tutorials, and removing the OEM components was the toughest part of the install. The new parts went in effortlessly, with flawless welds! Definitely worth it. I also cleaned the hubcaps, which added clearance and made the setup look much cleaner. Highly recommended, took about an hour to finish. On my 2023 4Runner, it was very easy. You might need a helper. Overall, a very engaging installation experience.
