Ir a la información del producto
1 de 9

Manguera de suministro de aceite VANOS mejorada para BMW E36, E46, Z3 y Z4 M52 M54 11361705532

En stock

9112010700

Precio habitual €29,99
Precio de oferta €29,99 Precio habitual
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Miles de personas confían en nosotros
  • Valorados y reseñados

¿Quieres que lo enviemos al día siguiente? ¡Date prisa!

¿Listo para reemplazar la línea de aceite del VANOS de tu motor M52 o M54? 
Las líneas de suministro de aceite originales tienen un sellado inconsistente y la poca superficie de la arandela de aplastamiento puede hacer que el VANOS no alcance la presión de aceite necesaria. 
Reemplazar la línea de aceite original cuesta más de 100 $ y la conexión prensada puede volver a presentar fugas fácilmente con el tiempo. 
Las líneas de suministro de aceite BEVINSEE están fabricadas con mejores materiales para ofrecer un mejor rendimiento.

Características:

  • 【Mejora del material】Carcasa de acero inoxidable + revestimiento de teflón PTFE, que ofrece una durabilidad mucho mayor que la manguera de goma original.
  • 【Prevención de fugas de aceite】Resistente al desgaste, a las altas temperaturas y a los productos químicos, lo que evita los riesgos de envejecimiento y fugas. Soporta ciclos de alta presión sin fallar. Puede soportar aproximadamente 1138 psi a una temperatura de 150 °C.
  • 【Pernos banjo de acero inoxidable】Significativamente más resistentes y resistentes a la corrosión que los tornillos originales, ofreciendo un reemplazo completo.

Especificaciones:

  • Marca: BEVINSEE
  • Estado: Nuevo
  • Tipo: Línea de suministro de aceite del VANOS
  • Material: Trenzado de acero inoxidable, acero inoxidable
  • Reemplaza los números de pieza:  11361705532,11 36 1 705 532,32416783886,32 41 6 783 886,32411093596,32 41 1 093 596

Nota:
Si utilizas una carcasa del filtro de aceite S54/S50 Euro/S52 en un motor de especificación estadounidense, no encajará.
Par de apriete de los pernos de la carcasa del termostato: 32 Nm (24 ft-lb)

Compatibilidad:
No es compatible con motores S54/S52/S50 ni M50

Para BMW Serie 3 E36 320i 323i 328i   1995 - 2000
Para BMW Serie 3 E46 320i 320Ci 323i 323Ci 325i 325Ci 328i 328Ci 330i 330Ci     1999 - 2006
Para BMW Serie 5 E39 520i 523i 525i 528i 530i   1998 - 2004
Para BMW Serie 5  E60 520i 525i 530i           2003 - 2005
Para BMW Serie 5  E61 525i                         2003 - 2005
Para BMW X3 Serie E83  2.5i 3.0i                  2003 -2006
Para BMW X5 Serie E53  3.0i                        2000 - 2006
Para BMW Z3 Serie E36  2.2i 2.5i 2.8i 3.0i     1999 - 2002
Para BMW Z4 Serie E85  2.2i 2.5i 3.0i            2002 - 2005

Preguntas frecuentes:

¿Resistirá el uso en circuito y los ciclos térmicos repetidos?

Sí, la carcasa trenzada de acero inoxidable con revestimiento de PTFE está fabricada precisamente para eso y soporta alrededor de 1138 psi a 150 °C sin el envejecimiento ni las grietas que destruyen la manguera de goma original.

¿Debo reemplazar las juntas del VANOS al mismo tiempo o la línea por sí sola solucionará el problema?

La línea soluciona la fuga y restablece la presión de aceite adecuada en el VANOS. Las juntas son un componente de desgaste independiente, así que, si las tuyas también están envejecidas, es un buen momento para cambiar ambas cosas a la vez.

¿Qué par de apriete debo utilizar y es difícil acceder al perno banjo inferior?

Los pernos de la carcasa del termostato deben apretarse a 32 Nm (24 ft-lb). Ten en cuenta que el área del banjo inferior es estrecha: muchos propietarios consideran que hay espacio para una carraca pequeña, pero no para una llave dinamométrica larga.

Descargo de responsabilidad:
Las piezas Bevinsee no están patrocinadas ni aprobadas por las marcas para cuyos vehículos son compatibles, ni están afiliadas a ellas, incluidas Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.



  • 5 stars: 11 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
T
Tommy Jameslo
Good service

My stock subframe bushings were toast on my ��96 323i, and these have the car feeling fresh off the lot again.

D
Daminael
95A Subframe Bushing

Awesome. The car feels way more planted. If you haven't done this yet and your subframe mounts are still intact, I'd definitely recommend it.

N
Nioami026
Well fits

Great part. Fit and finish were top-notch. Really tidied up the bay and I'm finally done dealing with the stock leaky setup. Lines are spot on.

A
Andrew Howbs
Replaced old leaky Vanos line

A great replacement for that old leaky factory lines especially on built or hard-driven motors where extra peace of mind matters.

M
Mislendier
Quick installstion

No fitment problems at all, true bolt-on line. Banjo threads are clean and well cut. Solid upgrade over the stock OEM line.

L
Lucford
improve performance and longevity

Decided to upgrade to this line for better power and long-term durability. Install wasn't a headache. Overall glad with the buy.

B
Berry Brown
Happy with it

Replaced my very leaky old factory VANOS Line and the new one perfect fits.

H
Hamond
Solves the issue

I noticed some oil leaking from the factory VANOS oil line connector on my M52 engine. I did some research and saw many positive reviews about replacing the oil line on forums. I thought I'd give it a try. I installed it myself in about 30 minutes, and the new oil line's connectors perfectly matched the spacing between the oil inlet and outlet. It's been two weeks since the installation, and I've driven about 150 miles, and everything is working fine.

V
Vantam2018
No more leaks

It's been on the car two weeks now and it's running solid with zero oil leaks.

T
Torsten Andersen

Rigtig god kvalitet

D
Dustin Lange

.

¿Preguntas sobre este producto?
Haz clic para contactarnos y obtener más información.